The All New Super Calcomp 9000 Digitizer Switch Settings

Updated at Pack 2001 for your convenience

-From the Mapman J. Tryall. Happy digitizing!

LOGGERPC SWITCH SETTINGS

SW1	U	U	U	U	U	D	D	U
SW2	D	D	D	U	D	D	U	D
SW3	D	U	U	D	D	U	D	D
	1	2	3	4	5	6	7	8

U = up

D = down

Remember to push reset before you initialize it the digitizer.

Also, use the CAL9000.wdc configuration file.

ARC/INFO

SW1	U	U	U	U	U	D	U	U
SW2	U	D	D	D	D	D	U	D
SW3	D	D	U	D	U	U	D	D
	1	2	3	4	5	6	7	8

U = up

D = down

Remember to push reset when starting Arc/Info or after you

bail out.

To test it out, at the arc prompt type:

Arc: digitizer 9000 com2

Arc: digtest 9000 com2

Then just follow the instructions.

PLANS

For Calcomp 9000 (digitizer #2, with the pink flagging)

SW1	U	U	U	U	U	D	D	U
SW2	U	D	D	D	D	U	D	U
SW3	U	D	U	D	D	U	D	D
	1	2	3	4	5	6	7	8

U = up

D = down

In PLANS, for digitizer select:

Calcomp9000 – Terrasoft, Hex 61 Dec 97, Com2,

9600 baud rate, no parity, 8 bits, 1 stop bit, no AutoCad

compatibility