Lab 8 (Due 5/24 11:00pm)

Preliminaries

These instructions will most likely get edited over the next couple of days. I'll tryt o flag changes.

As usual, check the write up instructions first.

Requirements for this assignment

• 0. Make sure you have a baseline test suite corresponding to your lab 7 grammar.
• 1. Find one more simple sentence from your test corpus and try to get your grammar to be able to parse it.
• 2. Use VPM to cut back on range of generation.
• 3. Get one sentence translation from English (or Italian) to your language. (We'll do the rest of the sentences next week.)
• 4. Test your grammar using [incr tsdb()]. [incr tsdb()] should be part of your test-development cycle. In addition, you'll need to run a final test suite instance for this lab to submit along with your basline.
• 5. Write up the lab.

Run a baseline test suite

Before making any changes to your grammar for this lab, run a baseline test suite instance. If you decide to add items to your test suite for the material covered here, consider doing so before modifying your grammar so that your baseline can include those examples. (Alternatively, if you add examples in the course of working on your grammar and want to make the snapshot later, you can do so using the grammar you turned in for Lab 7.)

One sentence from the test corpus

The goal of this section is to parse one more sentence from your test corpus than you are before starting this section, i.e., one more than last week. In your write up, you should document what you had to add to get the sentence working. Note that it is possible to get full credit here even if the sentence ultimately doesn't parse by documenting what you still have to get working.

This is (again) a very open-ended part of the lab (even more so than usual), which means: A) you should get started early and post to GoPost so I can assist in developing analyses of whatever additional phenomena you run accross and B) you'll have to restrain yourselves; the goal isn't to parse the whole test corpus this week ;-).

• Create a profile from your test corpus skeleton, and run a baseline.
• Look for some plausible candidate sentences. These should be relatively short and ideally have minimal additional grammatical phenomena beyond what we have already covered.
• Examine the lexical items required for your target sentence(s). Add any that should belong to lexical types you have already created.
• Try parsing the test corpus again (or just your target sentence from it).
• If your target sentence parses, check the MRS to see if it is reasonable.
• If your target sentence doesn't parse, check to see whether you still have lexical coverage errors. Fixing these may require adapting existing lexical rules, adding lexical rules, and/or adding lexical types. Post to GoPost for assistance.
• If your target sentence doesn't parse but your grammar does find analyses for each lexical item, then examine the parse chart to identify the smallest expected constituent that the grammar is not finding, and debug from there. Do you have the phrase structure rule that should be creating the constituent? If so, try interactive unification to see why the expected daughters aren't forming a phrase with that rule. Do you need to add a phrase structure rule? Again, post to GoPost for assistance.
• Iterate until either the sentence parses or you at least have a clear understanding of what you would need to add to get it parsing.
• Run your full test suite after any changes you make to your grammar to make sure you aren't breaking previous coverage.

Variable property mapping

The file semi.vpm provides a mapping between grammar-external features of indices (referential indices and events) and their values, and grammar-internal ones. For background on VPM, see the DELPH-IN wiki. As soon as you start using a VPM file, then only variable properties (features on indices) that are handled in the file are actually preserved.

1. You should already have a semi.vpm file provided by the customization system. Open it up and see which variable properties are there, and then look in your grammar to see what is missing. In general, we'd expect to see all of the features of the types event and ref-ind represented in a mature semi.vpm file.
2. Updated 5/21/13 You need to tell the lkb to load the semi.vpm file by uncommenting the following line in lkb/script:

   (mt:read-vpm (lkb-pathname (parent-directory) "semi.vpm") :semi)
   

3. Updated 5/23/13 This line needs to be moved higher in the script file, specifically, it needs to be before the code block that loads the trigger rules.
4. Updated 5/23/13 You'll also need to add this lines to lkb/mrsglobals.lsp:

   (setf *variable-type-mapping* :semi)
   

5. If your grammar uses a PERNUM feature, you'll need to map separate PER and NUM features from the external (right-hand side) of the VPM to a single PRENUM feature on the internal (left-hand side). See the example under "Properties: An Example" on the DELPH-IN wiki page.
6. If your grammar encodes aspectual distinctions, you'll need to add an ASPECT section, modeled on tense. This should allow you to create and use specific a default value of ASPECT.
7. If you have any other features you have added on indices, you will need to provide VPM entries for them as well.
8. If your language has aspect marked in some sentences but other forms that are just underspecified for aspect, you'll want to have the default aspect be "no-aspect". Define this as a subtype of aspect in your grammar, but don't have anything other than the semi.vpm mention it otherwise.
9. You can do a similar trick for other kinds of generation ambiguity relating to variable properties.

Test your semi.vpm file by parsing and then generating. You should see fewer strings coming out.

First MT

1. Download the English and Italian grammars. These versions are now updated to work with current KNOPPIX+LKB 5/21/13. Unpack each of them with tar xzf eng.tgz and tar xzf ita.tgz.
2. Start two separate emacsen. Put one on the left of your screen (this will be the "source" emacs). Put one on the right of your screen ("target" emacs).
3. Start the LKB in each. Make sure the "source" LKB Top menu is on the left of the screen and the "target" one is on the right.
4. Load the English grammar into the "source" LKB.
5. Load the Italian grammar into the "target" LKB.
6. In the "target" LKB, select Options | Expand menu.
7. In the "target" LKB, select Generate | Start server.
8. In the "source" emacs/lkb parse the English sentence Dogs sleep.
9. From the pop-up menu on the tree that comes up, select "Rephrase." You should see a transfer output window and then the Italian grammar should output "cani DORM-ONO" in a realizations window.

Attempt to translate into your language

1. Edit the file lkb/globals.lsp to add the following line, with "iso" replaced by the three-letter iso code for your language:

   (setf *translate-grid* '(:iso :eng :ita))
   

2. Edit the flie lkb/globals.lsp in the English and Italian grammars so that the line for *translate-grid* now looks like the appropriate one of the lines below (again replacing "iso" with the code for your language).

   (setf *translate-grid* '(:eng :ita :iso))
   (setf *translate-grid* '(:ita :eng :iso))
   

3. Updated 5/21/13: Edit the file lkb/mrsglobals.lsp in your grammar to add the following line:

   (setf *show-lnk-p* nil)
   

4. Now load your grammar into the "target" lkb.
5. Parse Dogs sleep with the English grammar in the "source" lkb and select "rephrase".
6. Observe what happens: Do you get generation outputs? Some error in the emacs buffer in the "target" emacs?
7. If you get an error, you'll need to compare the MRSs to to see what the difference is. I expect that for Dogs sleep you won't need any transfer rules, and thus any errors should be addressed through harmonization (aka cleaning up your MRS) and/or work on your semi.vpm file. Thus, this is a good one to work on for this week.

Comparing MRSs

To compare the MRSs, you can look at the MRS from the English grammar directly, but this can be a bit misleading, since you really want to look at the input to the generator (i.e., the transfer output). To do this, you can select "Generate | Display Input MRS" or "Generate | Display Internal MRS" from the "target" LKB Top menu.

1. Generate | Display Internal MRS
2. Parse the expected output
3. Choose Indexed MRS from the pop-up menu

There are a number of things that could be wrong:

1. Missing RELS or HCONS (broken diff-list append).
2. Misspelled PRED values (look carefully at the underscores).
3. Misspelled/differently spelled feature values (e.g. sing instead of sg).
4. Misspelled/differently spelled feature names (e.g., PERS instead of PER).
5. Incompatible variable properties (features and values).

Update semi.vpm, if necessary

The file semi.vpm provides a mapping between grammar-external features of indices (referential indices and events) and their values, and grammar-internal ones. For background on VPM, see the DELPH-IN wiki.

1. If your grammar uses a PERNUM feature, you'll need to map separate PER and NUM features from the external (right-hand side) of the VPM to a single PRENUM feature on the internal (left-hand side). See the example under "Properties: An Example" on the DELPH-IN wiki page. (There is also a an example in the semi.vpm file in the eng grammar.)
2. If your grammar encodes aspectual distinctions, you'll need to add an ASPECT section, modeled on tense. This should allow you to specific a default value of ASPECT as well. Note that the English and Italian grammars don't encode tense or aspect, so this is strictly for the MT demo.
3. If your language has aspect marked in some sentences but other forms that are just underspecified for aspect, you'll want to have the default aspect be "no-aspect". Define this as a subtype of aspect in your grammar, but don't have anything other than the semi.vpm mention it otherwise.

MT look-ahead

For next week, we'll be attempting to cover the sentences in the following files:

• English MMT sentences
• Italian MMT sentences

... and so you'll need to collect (or create) translations of those sentences into your language for lab 9. We'll also work on transfer rules so that we can handle cases of translation divergence (e.g., pro-drop v.\ pronouns but also "do harm" v.\ "hurt" and others).

1. For whatever you fixed about your grammar as you worked on the test corpus sentence, provide the usual "phenomenon" write up (as in previous labs).
2. Describe any changes you needed to make the semi.vpm file, and the effects that including the semi.vpm had on generation.
3. Describe any changes you needed to make to get MT working, with "Dogs sleep" or some other simple sentence.
4. Provide the sentence that you worked on for MT, so I can test it.
5. Describe the current coverage of your grammar over your test suite (using numbers you can get from Analyze | Coverage and Analyze | Overgeneration in [incr tsdb()]) and a comparison between your baseline test suite run and your final one for this lab (see Compare | Competence).

Submit your assignment

• If you're using svn for version control, run svn export to make a copy of your lab directory that does not include .svn files.
• Remove extraneous [incr tsdb()] profiles from the copied directory. (I'd like the initial baseline and final result for both test suite and test corpus; Only keep intermediate versions that you specifically want to say something about.)
• Create a tarball of your grammar, your tsdb directory including both initial and final profiles, and your write up. The best way to do this (so that it unpacks most easily when I download from CollectIt) is to cd into the directory containing your lab (e.g., cd lab8/) and do:

  tar czf lab8.tgz *

  (When I download your submission from CollectIt, it comes in a directory named with your UWNetID. The above method avoids extra directory structure inside that directory.)

• Upload the tarball to CollectIt