MOD-MP3-X

MP3 PLAYER MODULE WITH VS1053 MP3 DECODER/ENCODER

../_images/MOD-MP3-X_jumpers.png

Jumper Settings for UEXT Playback

Jumper UEXT Playback mode
UEXT/BAT UEXT
BOOT_E opened
SA_E opened
DREQ_E opened
MP3_RST/TXD MP3_RST
DREQ/RXD DREQ
STM_RST closed
VLS_RST opened

FEATURES

  • Based on VS1053 hardware decoder for MPEG 1 & 2 audio layer 3 (ISO 11172-3), MP3+V, WAV and PCM files
  • Supports ADPCM encoding and decoding
  • Supports VBR (variable bitrate) for MP3
  • Supports streaming
  • Single 1.5V battery cell operation with on board low power DC/DC voltage boost converter on board STM32F103RBT6 microcontroller (not available on MOD-MP3-X-LITE)
  • USB mass storage device (not available on MOD-MP3-X-LITE)
  • Accepts commands for play, stop, forward, reverse through RS232 which allow easy adding voice, music to your project with microcontroller (not available on MOD-MP3-X-LITE)
  • UEXT to connect to host microcontroller (standard connector on our ARM development boards)
  • Can work as stand-alone MP3 player operation
  • SD/MMC card on board
  • Li-ion charger and 3.7V 1200mAh battery (MOD-MP3-X-BAT only)
  • Stereo Audio microphone jack, Stereo Audio headphones jack
  • Can be used to record and playback
  • triple action lever switch: Forward, Reverse, Play/Pause action
  • PCB: FR-4, 1.5 mm (0,062”), green soldermask, white silkscreen component print
  • Dimensions: 60x60 mm (2.36x2.36”)

DOCUMENTS

MOD-MP3-X.pdf user manual

Table Of Contents

Previous topic

VS1002 Audio Decoder Chip

Next topic

VS1053 Audio Decoder Chip

This Page