===========
LPC2378_STK
===========

.. image:: LPC2378_STK/LPC2378_STK_F.jpg
    :height: 250

https://www.olimex.com/Products/ARM/NXP/LPC2378-STK/

Manual: :download:`LPC-2378STK.pdf <LPC2378_STK/LPC-2378STK.pdf>`

Schematic: :download:`LPC2378_STK_schematic_diagram.pdf <LPC2378_STK/LPC2378_STK_schematic_diagram.pdf>`


MCU
===
* LPC2378 16/32 bit ARM7TDMI-S
* 512K Bytes Program Flash
* 16K Bytes RAM
* EXTERNAL MEMORY BUS
* RTC
* 4x 10 bit ADC 2.44 uS
* 2x UARTs
* 4x CAN
* I2C
* SPI
* 2x 32bit TIMERS
* 7x CCR
* 6x PWM
* WDT
* 5V tolerant I/O
* up to 60MHz operation

Board
=====
* Standard JTAG connector with ARM 2x10 pin layout 
  for programming/debugging with ARM-JTAG
* Optional - TRACE connector
* 128x128 pixel 12 bit color TFT LCD with backlight
* Ethernet 100MBit
* MMA7620 3 axis accelerometer
* Two RS232 port
* Two CAN drivers and connector
* SD/MMC card connector
* UEXT connector with I2C, SPI, RS232 and power supply 
  for connecting add-on modules like RF link, MP3, etc available from Olimex
* IrDA transciever on board
* Audio in and Audio Out jacks for microphone and headphones
* trimpot connected to ADC
* RESET circuit with external control of Philips ISP utility via RS232 port
* Jumpers for ISP/RUN mode
* Joystick with four directions and push action
* two USER button
* RESET Button
* two on board voltage regulators 3V and 5V with up to 800mA current
* Extension port connector for many of microcontrollers pins
* single power supply: External power supply, USB or JTAG connector
* Battery holder and connector for the RTC
* power supply led
* FR-4, 1.5 mm, red soldermask, component print
* Dimensions: 135x101mm (5.3x3.98")