Guarding and Cover Assembly

1. Replace the small Side Shroud next to the flywheel.  It is attached with one 3/8" bolt that can be tightened using the 1/4" socket and ratchet.

2. Replace the Cylinder Shroud (or Cooling Fin Cover).  It is attached by one flat-head screw located above the crankshaft.

3. Replace the Flywheel Shroud (or Blower Housing).  It is attached by one 3/8" bolt on the top of the Cylinder Block near the Cylinder Head and one 3/8" bolt at the base of the engine.

4. Reconnect the spark plug wire pushing it down firmly onto the sparkplug electrode.