LPC2378_STK¶
https://www.olimex.com/Products/ARM/NXP/LPC2378-STK/
Manual: LPC-2378STK.pdf
Schematic: LPC2378_STK_schematic_diagram.pdf
MCU¶
- LPC2378 16/32 bit ARM7TDMI-S
- 512K Bytes Program Flash
- 16K Bytes RAM
- EXTERNAL MEMORY BUS
- RTC
- 4x 10 bit ADC 2.44 uS
- 2x UARTs
- 4x CAN
- I2C
- SPI
- 2x 32bit TIMERS
- 7x CCR
- 6x PWM
- WDT
- 5V tolerant I/O
- up to 60MHz operation
Board¶
- Standard JTAG connector with ARM 2x10 pin layout for programming/debugging with ARM-JTAG
- Optional - TRACE connector
- 128x128 pixel 12 bit color TFT LCD with backlight
- Ethernet 100MBit
- MMA7620 3 axis accelerometer
- Two RS232 port
- Two CAN drivers and connector
- SD/MMC card connector
- UEXT connector with I2C, SPI, RS232 and power supply for connecting add-on modules like RF link, MP3, etc available from Olimex
- IrDA transciever on board
- Audio in and Audio Out jacks for microphone and headphones
- trimpot connected to ADC
- RESET circuit with external control of Philips ISP utility via RS232 port
- Jumpers for ISP/RUN mode
- Joystick with four directions and push action
- two USER button
- RESET Button
- two on board voltage regulators 3V and 5V with up to 800mA current
- Extension port connector for many of microcontrollers pins
- single power supply: External power supply, USB or JTAG connector
- Battery holder and connector for the RTC
- power supply led
- FR-4, 1.5 mm, red soldermask, component print
- Dimensions: 135x101mm (5.3x3.98”)